B002A DTC For Flint 60
Flint 60 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Flint 60 engine control system detects a problem, the computer stores the diagnostic trouble
code B002A in its memory.
To figure out what is wrong with your vehicle you must first extract the B002A DTC For Flint 60.
B002A Flint 60 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B002A Flint 60 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 0 |
Transmission |
| 2 |
Cruise Control Servo Indicates Low |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine B002A Flint 60 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B002A DTC For Flint 60 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B002A!
You can also check other Flint car models :
|
The listed Flint models will give information about B002A DTC.
|
