B0354 DTC For Saab 95
Saab 95 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Saab 95 engine control system detects a problem, the computer stores the diagnostic trouble
code B0354 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0354 DTC For Saab 95.
To solve B0354 Saab 95 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
B0354 Saab 95 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 5 |
BBV Sensor Circuit Low Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
If your vehicle failed a B0354 Saab 95 test and the B0354 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses B0354 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look B0354 DTC For Saab 95: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Saab car models :
|
The listed Saab models will give information about B0354 DTC.
|
