B0368 DTC For Nsu Wankel

Nsu Wankel Engine Specifications:
Engine Type :Multi-Cylinder Engine
Cylinder Type :W-Type Engine
Engine Air Intake Process :Supercharged Engine

Your Nsu Wankel engine control system detects a problem, the computer stores the diagnostic trouble code B0368 in its memory. To figure out what is wrong with your vehicle you must first extract the B0368 DTC For Nsu Wankel.

On 1999 and later B0368 Nsu Wankel engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.

B0368 Nsu Wankel DTC Meaning

B Body Code - Problem is antilock brake system, electronic suspension and steering systems.
0 SAE - Generic
3 IC Module 4X Ref Circuit Intermittent, No Pulses
6 Vehicle Speed Output Circuit
8 Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0368 Nsu Wankel code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

B0367 DTC (Previous DTC Code) ( Next DTC Code ) B0369 DTC
You can also check other Nsu car models :
The listed Nsu models will give information about B0368 DTC.