Your Packard 200 engine control system detects a problem, the computer stores the diagnostic trouble
code B0369 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0369 DTC For Packard 200.
A good ground connection is also extremely important. B0369 Packard 200 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B0369 Packard 200 DTC Meaning
Body Code - Problem is antilock brake system, electronic suspension and steering systems.
SAE - Generic
IC Module 4X Ref Circuit Intermittent, No Pulses
Vehicle Speed Output Circuit
A/C System High Pressure High Temperature
When you turn on the ignition, the Service Engine Soon or Check Engine B0369 Packard 200 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B0369 DTC For Packard 200 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B0369!