B0533 DTC For Nissan Hardbody

Nissan Hardbody Engine Specifications:
Engine Type :Multi-Cylinder Engine
Cylinder Type :W-Type Engine
Engine Air Intake Process :Naturally Aspirated

Your Nissan Hardbody engine control system detects a problem, the computer stores the diagnostic trouble code B0533 in its memory. To figure out what is wrong with your vehicle you must first extract the B0533 DTC For Nissan Hardbody.

A good ground connection is also extremely important. B0533 Nissan Hardbody engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).

B0533 Nissan Hardbody DTC Meaning

B Body Code - Problem is antilock brake system, electronic suspension and steering systems.
0 SAE - Generic
5 Auxiliary Emission Controls
3 Low Coolant Circuit
3 TFP Valve Position Switch-Drive Without Drive Ratio

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0533 Nissan Hardbody code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

B0532 DTC (Previous DTC Code) ( Next DTC Code ) B0534 DTC
You can also check other Nissan car models :
The listed Nissan models will give information about B0533 DTC.