B0843 DTC For Porsche Panamera Type 970
Porsche Panamera Type 970 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Porsche Panamera Type 970 engine control system detects a problem, the computer stores the diagnostic trouble
code B0843 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0843 DTC For Porsche Panamera Type 970.
On 1999 and later B0843 Porsche Panamera Type 970 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B0843 Porsche Panamera Type 970 DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
0 |
SAE - Generic |
8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
4 |
Control Module Throttle Actuator Position Performance |
3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0843 Porsche Panamera Type 970 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Porsche car models :
The listed Porsche models will give information about B0843 DTC.
|