B2288 DTC For Sunbeam 24
Sunbeam 24 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Sunbeam 24 engine control system detects a problem, the computer stores the diagnostic trouble
code B2288 in its memory.
To figure out what is wrong with your vehicle you must first extract the B2288 DTC For Sunbeam 24.
A good ground connection is also extremely important. B2288 Sunbeam 24 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B2288 Sunbeam 24 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 2 |
Computer And Auxiliary Outputs |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B2288 Sunbeam 24 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Sunbeam car models :
|
The listed Sunbeam models will give information about B2288 DTC.
|
