B247F DTC For Dkw 3
Dkw 3 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | V-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Dkw 3 engine control system detects a problem, the computer stores the diagnostic trouble
code B247F in its memory.
To figure out what is wrong with your vehicle you must first extract the B247F DTC For Dkw 3.
On 1999 and later B247F Dkw 3 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B247F Dkw 3 DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
2 |
MFG - Manufacturer Specific |
4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
7 |
Exhaust Gas Recirculation System Valve 1 |
F |
TFP Valve Position Switch-Drive Without Drive Ratio |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. B247F Dkw 3 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Dkw car models :
The listed Dkw models will give information about B247F DTC.
|