B264C DTC For Nissan Pino
Nissan Pino Engine Specifications:
Engine Type : | Single Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Nissan Pino engine control system detects a problem, the computer stores the diagnostic trouble
code B264C in its memory.
To figure out what is wrong with your vehicle you must first extract the B264C DTC For Nissan Pino.
A good ground connection is also extremely important. B264C Nissan Pino engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B264C Nissan Pino DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
2 |
MFG - Manufacturer Specific |
6 |
Vehicle Speed Control And Idle Control System |
4 |
Control Module Throttle Actuator Position Performance |
C |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B264C Nissan Pino code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Nissan car models :
The listed Nissan models will give information about B264C DTC.
|