B2889 DTC For Jensen S V8
Jensen S V8 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Jensen S V8 engine control system detects a problem, the computer stores the diagnostic trouble
code B2889 in its memory.
To figure out what is wrong with your vehicle you must first extract the B2889 DTC For Jensen S V8.
A good ground connection is also extremely important. B2889 Jensen S V8 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B2889 Jensen S V8 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 9 |
A/C System High Pressure High Temperature |
When you turn on the ignition, the Service Engine Soon or Check Engine B2889 Jensen S V8 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B2889 DTC For Jensen S V8 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B2889!
You can also check other Jensen car models :
|
The listed Jensen models will give information about B2889 DTC.
|
