Your Daewoo Espero engine control system detects a problem, the computer stores the diagnostic trouble
code B3382 in its memory.
To figure out what is wrong with your vehicle you must first extract the B3382 DTC For Daewoo Espero.
On 1999 and later B3382 Daewoo Espero engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B3382 Daewoo Espero DTC Meaning
Body Code - Problem is antilock brake system, electronic suspension and steering systems.
SAE - Generic
IC Module 4X Ref Circuit Intermittent, No Pulses
Crankshaft Position Sensor Circuit Performance
Kick-Down Switch Failed Short
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B3382 Daewoo Espero code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.