Your Daewoo Magnus engine control system detects a problem, the computer stores the diagnostic trouble
code C0140 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0140 DTC For Daewoo Magnus.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C0140 Daewoo Magnus that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C0140 Daewoo Magnus DTC Meaning
Chassis Code - Problem is controller area network wiring bus and modules.
SAE - Generic
Fuel And Air Metering
Control Module Throttle Actuator Position Performance
Transmission Engaged At High Throttle Angle
The rule of C0140 Daewoo Magnus code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of C0140. Likewise, overriding the OBD C0140 DTC For Daewoo Magnus system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.