C0140 DTC For Daewoo No 1

Daewoo No 1 Engine Specifications:
Engine Type :Single Cylinder Engine
Cylinder Type :Opposed Cylinder Engine
Engine Air Intake Process :Turbocharged Engine

Your Daewoo No 1 engine control system detects a problem, the computer stores the diagnostic trouble code C0140 in its memory. To figure out what is wrong with your vehicle you must first extract the C0140 DTC For Daewoo No 1.

To solve C0140 Daewoo No 1 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs

C0140 Daewoo No 1 DTC Meaning

C Chassis Code - Problem is controller area network wiring bus and modules.
0 SAE - Generic
1 Fuel And Air Metering
4 Control Module Throttle Actuator Position Performance
0 Transmission Engaged At High Throttle Angle

While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C0140 Daewoo No 1 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.

C013F DTC (Previous DTC Code) ( Next DTC Code ) C0141 DTC
You can also check other Daewoo car models :
The listed Daewoo models will give information about C0140 DTC.