Your Triumph 1300 engine control system detects a problem, the computer stores the diagnostic trouble
code C0236 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0236 DTC For Triumph 1300.
C0236 Triumph 1300 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
C0236 Triumph 1300 DTC Meaning
Chassis Code - Problem is controller area network wiring bus and modules.
SAE - Generic
Computer And Auxiliary Outputs
Low Coolant Circuit
Transmission Control Module Reprogrammable Memory
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0236 Triumph 1300 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.