C1182 DTC For Fiat 8hp
Fiat 8hp Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Fiat 8hp engine control system detects a problem, the computer stores the diagnostic trouble
code C1182 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1182 DTC For Fiat 8hp.
On 1999 and later C1182 Fiat 8hp engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C1182 Fiat 8hp DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 2 |
Kick-Down Switch Failed Short |
When you turn on the ignition, the Service Engine Soon or Check Engine C1182 Fiat 8hp light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C1182 DTC For Fiat 8hp so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C1182!
You can also check other Fiat car models :
|
The listed Fiat models will give information about C1182 DTC.
|
