Your Mercedes Benz Viano engine control system detects a problem, the computer stores the diagnostic trouble
code C229D in its memory.
To figure out what is wrong with your vehicle you must first extract the C229D DTC For Mercedes Benz Viano.
C229D Mercedes Benz Viano engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
C229D Mercedes Benz Viano DTC Meaning
Chassis Code - Problem is controller area network wiring bus and modules.
MFG - Manufacturer Specific
Computer And Auxiliary Outputs
TP Sensor Learn Not Complete
TFP Valve Position Switch-Drive Without Drive Ratio
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C229D Mercedes Benz Viano code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.