C2300 Hyundai Santafe DTC Code

Hyundai Santafe Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Naturally Aspirated

Your Hyundai Santafe engine control system detects a problem, the computer stores the diagnostic trouble code C2300 in its memory. To figure out what is wrong with your vehicle you must first extract the C2300 DTC For Hyundai Santafe.

C2300 Hyundai Santafe engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)

C2300 Hyundai Santafe DTC Meaning

C	Chassis Code - Problem is controller area network wiring bus and modules.
2	MFG - Manufacturer Specific
3	IC Module 4X Ref Circuit Intermittent, No Pulses
0	Air Conditioning (A/C) Clutch Feedback Circuit High Voltage
0	Transmission Engaged At High Throttle Angle

There are currently two main types of cylinder deactivation used today, depending on the type of engine. C2300 Hyundai Santafe code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.