C2462 DTC For Chenard Walcker 3 Litre

Chenard Walcker 3 Litre Engine Specifications:
Engine Type :Single Cylinder Engine
Cylinder Type :Opposed Cylinder Engine
Engine Air Intake Process :Turbocharged Engine

Your Chenard Walcker 3 Litre engine control system detects a problem, the computer stores the diagnostic trouble code C2462 in its memory. To figure out what is wrong with your vehicle you must first extract the C2462 DTC For Chenard Walcker 3 Litre.

On 1999 and later C2462 Chenard Walcker 3 Litre engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.

C2462 Chenard Walcker 3 Litre DTC Meaning

C Chassis Code - Problem is controller area network wiring bus and modules.
2 MFG - Manufacturer Specific
4 Fuel And Air Metering (Injector Circuit Malfunctions Only)
6 Vehicle Speed Output Circuit
2 Kick-Down Switch Failed Short

While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C2462 Chenard Walcker 3 Litre code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.

C2461 DTC (Previous DTC Code) ( Next DTC Code ) C2463 DTC
You can also check other Chenard car models :
The listed Chenard models will give information about C2462 DTC.