C3184 DTC For Nash 400
Nash 400 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Nash 400 engine control system detects a problem, the computer stores the diagnostic trouble
code C3184 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3184 DTC For Nash 400.
On 1999 and later C3184 Nash 400 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C3184 Nash 400 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. C3184 Nash 400 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Nash car models :
|
The listed Nash models will give information about C3184 DTC.
|
