C3458 DTC For Subaru Outback
Subaru Outback Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Subaru Outback engine control system detects a problem, the computer stores the diagnostic trouble
code C3458 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3458 DTC For Subaru Outback.
On 1999 and later C3458 Subaru Outback engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C3458 Subaru Outback DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 5 |
BBV Sensor Circuit Low Voltage |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. C3458 Subaru Outback code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Subaru car models :
|
The listed Subaru models will give information about C3458 DTC.
|
