P1364 DTC For Zagato Isocity
Zagato Isocity Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Zagato Isocity engine control system detects a problem, the computer stores the diagnostic trouble
code P1364 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1364 DTC For Zagato Isocity.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P1364 Zagato Isocity that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P1364 Zagato Isocity DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 6 |
Vehicle Speed Output Circuit |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1364 Zagato Isocity code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Zagato car models :
|
The listed Zagato models will give information about P1364 DTC.
|
