P1838 Audi Concept DTC Code

Audi Concept Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	Opposed Cylinder Engine
Engine Air Intake Process :	Naturally Aspirated

Your Audi Concept engine control system detects a problem, the computer stores the diagnostic trouble code P1838 in its memory. To figure out what is wrong with your vehicle you must first extract the P1838 DTC For Audi Concept.

A good ground connection is also extremely important. P1838 Audi Concept engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).

P1838 Audi Concept DTC Meaning

P	Powertrain Code - Problem is related engine, transmission and emissions systems.
1	MFG - Manufacturer Specific
8	Accelerator Pedal Position (APP) Sensor 1 Performance
3	Low Coolant Circuit
8	Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit

When you turn on the ignition, the Service Engine Soon or Check Engine P1838 Audi Concept light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1838 DTC For Audi Concept so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1838!