Your Honda Prelude engine control system detects a problem, the computer stores the diagnostic trouble
code P205E in its memory.
To figure out what is wrong with your vehicle you must first extract the P205E DTC For Honda Prelude.
P205E Honda Prelude engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
P205E Honda Prelude DTC Meaning
Powertrain Code - Problem is related engine, transmission and emissions systems.
MFG - Manufacturer Specific
BBV Sensor Circuit Low Voltage
TFP Valve Position Switch-Drive Without Drive Ratio
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P205E Honda Prelude code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.