Your Tsukuba Sedan engine control system detects a problem, the computer stores the diagnostic trouble
code P225F in its memory.
To figure out what is wrong with your vehicle you must first extract the P225F DTC For Tsukuba Sedan.
On 1999 and later P225F Tsukuba Sedan engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P225F Tsukuba Sedan DTC Meaning
Powertrain Code - Problem is related engine, transmission and emissions systems.
MFG - Manufacturer Specific
Computer And Auxiliary Outputs
BBV Sensor Circuit Low Voltage
TFP Valve Position Switch-Drive Without Drive Ratio
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P225F Tsukuba Sedan code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.