Your Bmw Wartburg engine control system detects a problem, the computer stores the diagnostic trouble
code P2466 in its memory.
To figure out what is wrong with your vehicle you must first extract the P2466 DTC For Bmw Wartburg.
On 1999 and later P2466 Bmw Wartburg engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P2466 Bmw Wartburg DTC Meaning
Powertrain Code - Problem is related engine, transmission and emissions systems.
MFG - Manufacturer Specific
Fuel And Air Metering (Injector Circuit Malfunctions Only)
Vehicle Speed Output Circuit
Transmission Control Module Reprogrammable Memory
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P2466 Bmw Wartburg code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.