P2925 DTC For Jeep Jeepster
Jeep Jeepster Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Jeep Jeepster engine control system detects a problem, the computer stores the diagnostic trouble
code P2925 in its memory.
To figure out what is wrong with your vehicle you must first extract the P2925 DTC For Jeep Jeepster.
Another consequence of P2925 Jeep Jeepster engine overheating may be a blown head gasket. Heat makes aluminum swell almost three times faster than cast iron. Thermal stress can distort the head and make it swell in areas that are hottest like those between exhaust valves in adjoining cylinders, and areas that have restricted coolant flow like the narrow area that separates the cylinders. The typical aluminum head swells most in the middle, which can crush the head gasket if the head gets too hot. This will usually cause the head gasket to leak compression between adjacent cylinders, or leak coolant into the cylinders.
P2925 Jeep Jeepster DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 2 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 2 |
Cruise Control Servo Indicates Low |
| 5 |
Cruise Inhibit Control Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P2925 Jeep Jeepster code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Jeep car models :
|
The listed Jeep models will give information about P2925 DTC.
|
