P2A07 DTC For Isuzu D Max

Isuzu D Max Engine Specifications:
Engine Type :Multi-Cylinder Engine
Cylinder Type :W-Type Engine
Engine Air Intake Process :Naturally Aspirated

Your Isuzu D Max engine control system detects a problem, the computer stores the diagnostic trouble code P2A07 in its memory. To figure out what is wrong with your vehicle you must first extract the P2A07 DTC For Isuzu D Max.

P2A07 Isuzu D Max engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)

P2A07 Isuzu D Max DTC Meaning

P Powertrain Code - Problem is related engine, transmission and emissions systems.
2 MFG - Manufacturer Specific
A Transmission
0 Air Conditioning (A/C) Clutch Feedback Circuit High Voltage
7 Cruise Control System - Vehicle Accel Too High

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P2A07 Isuzu D Max code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

P2A06 DTC (Previous DTC Code) ( Next DTC Code ) P2A08 DTC
You can also check other Isuzu car models :
The listed Isuzu models will give information about P2A07 DTC.