Your Overland 42 engine control system detects a problem, the computer stores the diagnostic trouble
code P3344 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3344 DTC For Overland 42.
A good ground connection is also extremely important. P3344 Overland 42 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P3344 Overland 42 DTC Meaning
Powertrain Code - Problem is related engine, transmission and emissions systems.
SAE - Generic
IC Module 4X Ref Circuit Intermittent, No Pulses
Control Module Throttle Actuator Position Performance
Cruise Vehicle Speed/Set Speed Difference Too High
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P3344 Overland 42 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.