U1459 DTC For Ford Lynx
Ford Lynx Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Ford Lynx engine control system detects a problem, the computer stores the diagnostic trouble
code U1459 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1459 DTC For Ford Lynx.
Another consequence of U1459 Ford Lynx engine overheating may be a blown head gasket. Heat makes aluminum swell almost three times faster than cast iron. Thermal stress can distort the head and make it swell in areas that are hottest like those between exhaust valves in adjoining cylinders, and areas that have restricted coolant flow like the narrow area that separates the cylinders. The typical aluminum head swells most in the middle, which can crush the head gasket if the head gets too hot. This will usually cause the head gasket to leak compression between adjacent cylinders, or leak coolant into the cylinders.
U1459 Ford Lynx DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 5 |
BBV Sensor Circuit Low Voltage |
| 9 |
A/C System High Pressure High Temperature |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1459 Ford Lynx code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ford car models :
|
The listed Ford models will give information about U1459 DTC.
|
