B0012 Oldsmobile Omega DTC Code

Oldsmobile Omega Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Turbocharged Engine

Your Oldsmobile Omega engine control system detects a problem, the computer stores the diagnostic trouble code B0012 in its memory. To figure out what is wrong with your vehicle you must first extract the B0012 DTC For Oldsmobile Omega.

On 1999 and later B0012 Oldsmobile Omega engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.

B0012 Oldsmobile Omega DTC Meaning

B	Body Code - Problem is antilock brake system, electronic suspension and steering systems.
0	SAE - Generic
0	Transmission
1	IC Circuit High Voltage
2	Kick-Down Switch Failed Short

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0012 Oldsmobile Omega code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.