B0043 Oldsmobile Curved Dash DTC Code

Oldsmobile Curved Dash Engine Specifications:

Engine Type :	Single Cylinder Engine
Cylinder Type :	Opposed Cylinder Engine
Engine Air Intake Process :	Naturally Aspirated

Your Oldsmobile Curved Dash engine control system detects a problem, the computer stores the diagnostic trouble code B0043 in its memory. To figure out what is wrong with your vehicle you must first extract the B0043 DTC For Oldsmobile Curved Dash.

A good ground connection is also extremely important. B0043 Oldsmobile Curved Dash engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).

B0043 Oldsmobile Curved Dash DTC Meaning

B	Body Code - Problem is antilock brake system, electronic suspension and steering systems.
0	SAE - Generic
0	Transmission
4	Control Module Throttle Actuator Position Performance
3	TFP Valve Position Switch-Drive Without Drive Ratio

While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B0043 Oldsmobile Curved Dash code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.