B0340 DTC For Mercedes A 160
Mercedes A 160 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes A 160 engine control system detects a problem, the computer stores the diagnostic trouble
code B0340 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0340 DTC For Mercedes A 160.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check B0340 Mercedes A 160 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
B0340 Mercedes A 160 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 4 |
Control Module Throttle Actuator Position Performance |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0340 Mercedes A 160 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about B0340 DTC.
|
