B0347 DTC For Mercedes S 63
Mercedes S 63 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes S 63 engine control system detects a problem, the computer stores the diagnostic trouble
code B0347 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0347 DTC For Mercedes S 63.
B0347 Mercedes S 63 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B0347 Mercedes S 63 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 4 |
Control Module Throttle Actuator Position Performance |
| 7 |
Cruise Control System - Vehicle Accel Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine B0347 Mercedes S 63 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B0347 DTC For Mercedes S 63 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B0347!
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about B0347 DTC.
|
