B0351 DTC For Mercedes Benz 200
Mercedes Benz 200 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Mercedes Benz 200 engine control system detects a problem, the computer stores the diagnostic trouble
code B0351 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0351 DTC For Mercedes Benz 200.
To solve B0351 Mercedes Benz 200 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
B0351 Mercedes Benz 200 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 5 |
BBV Sensor Circuit Low Voltage |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0351 Mercedes Benz 200 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about B0351 DTC.
|
