B0447 DTC For Jensen Interceptor
Jensen Interceptor Engine Specifications:
Engine Type : | Single Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Jensen Interceptor engine control system detects a problem, the computer stores the diagnostic trouble
code B0447 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0447 DTC For Jensen Interceptor.
B0447 Jensen Interceptor engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B0447 Jensen Interceptor DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
0 |
SAE - Generic |
4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
4 |
Control Module Throttle Actuator Position Performance |
7 |
Cruise Control System - Vehicle Accel Too High |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B0447 Jensen Interceptor code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Jensen car models :
The listed Jensen models will give information about B0447 DTC.
|