B0684 DTC For Hudson Wasp
Hudson Wasp Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Hudson Wasp engine control system detects a problem, the computer stores the diagnostic trouble
code B0684 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0684 DTC For Hudson Wasp.
A good ground connection is also extremely important. B0684 Hudson Wasp engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B0684 Hudson Wasp DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 6 |
Vehicle Speed Control And Idle Control System |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B0684 Hudson Wasp code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Hudson car models :
|
The listed Hudson models will give information about B0684 DTC.
|
