B0942 DTC For Mercedes Cla 180
Mercedes Cla 180 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Cla 180 engine control system detects a problem, the computer stores the diagnostic trouble
code B0942 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0942 DTC For Mercedes Cla 180.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check B0942 Mercedes Cla 180 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
B0942 Mercedes Cla 180 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 9 |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| 2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B0942 Mercedes Cla 180 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about B0942 DTC.
|
