B1005 DTC For Mercedes Cl 500
Mercedes Cl 500 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes Cl 500 engine control system detects a problem, the computer stores the diagnostic trouble
code B1005 in its memory.
To figure out what is wrong with your vehicle you must first extract the B1005 DTC For Mercedes Cl 500.
A good ground connection is also extremely important. B1005 Mercedes Cl 500 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B1005 Mercedes Cl 500 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 1 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 5 |
Cruise Inhibit Control Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine B1005 Mercedes Cl 500 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B1005 DTC For Mercedes Cl 500 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B1005!
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about B1005 DTC.
|
