B1147 DTC For Diva 10f
Diva 10f Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Diva 10f engine control system detects a problem, the computer stores the diagnostic trouble
code B1147 in its memory.
To figure out what is wrong with your vehicle you must first extract the B1147 DTC For Diva 10f.
On 1999 and later B1147 Diva 10f engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B1147 Diva 10f DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 4 |
Control Module Throttle Actuator Position Performance |
| 7 |
Cruise Control System - Vehicle Accel Too High |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B1147 Diva 10f code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Diva car models :
|
The listed Diva models will give information about B1147 DTC.
|
