B1148 DTC For Hyundai Veloster
Hyundai Veloster Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | In-Line Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Hyundai Veloster engine control system detects a problem, the computer stores the diagnostic trouble
code B1148 in its memory.
To figure out what is wrong with your vehicle you must first extract the B1148 DTC For Hyundai Veloster.
A good ground connection is also extremely important. B1148 Hyundai Veloster engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B1148 Hyundai Veloster DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 4 |
Control Module Throttle Actuator Position Performance |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
OBD B1148 Hyundai Veloster code and tailpipe testing are two different approaches to identify vehicles in need of repair. The OBD system looks for broken or malfunctioning emissions control components and B1148, while tailpipe tests sample a vehicle's exhaust to see if it is above or below certain prescribed limits. Given the robust nature of today's emissions control components, it is entirely possible for an individual component to B1148 DTC For Hyundai Veloster malfunction without leading to an immediate increase in emissions at the tailpipe. In such cases, other components (like the catalyst) can temporarily compensate for the part that is broken however, these other components can only do double duty for so long before they, too, begin to malfunction. In addition, OBD also monitors for B1148 DTC For Hyundai Veloster and other malfunctions in the fuel system problems that traditional tailpipe tests were not designed to identify. Most state and local areas also include a gas cap pressure test as part of an emission inspection.
You can also check other Hyundai car models :
|
The listed Hyundai models will give information about B1148 DTC.
|
