B1338 DTC For Rover P5
Rover P5 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Rover P5 engine control system detects a problem, the computer stores the diagnostic trouble
code B1338 in its memory.
To figure out what is wrong with your vehicle you must first extract the B1338 DTC For Rover P5.
A good ground connection is also extremely important. B1338 Rover P5 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B1338 Rover P5 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 3 |
Low Coolant Circuit |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
If your B1338 Rover P5 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system B1338 and engine control unit are in charge of monitoring a bunch of different B1338 DTC For Rover P5, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Rover car models :
|
The listed Rover models will give information about B1338 DTC.
|
