B2307 Dodge Nitro DTC Code

Dodge Nitro Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Naturally Aspirated

Your Dodge Nitro engine control system detects a problem, the computer stores the diagnostic trouble code B2307 in its memory. To figure out what is wrong with your vehicle you must first extract the B2307 DTC For Dodge Nitro.

B2307 Dodge Nitro engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)

B2307 Dodge Nitro DTC Meaning

B	Body Code - Problem is antilock brake system, electronic suspension and steering systems.
2	MFG - Manufacturer Specific
3	IC Module 4X Ref Circuit Intermittent, No Pulses
0	Air Conditioning (A/C) Clutch Feedback Circuit High Voltage
7	Cruise Control System - Vehicle Accel Too High

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B2307 Dodge Nitro code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.