B2403 DTC For Rover T 3
Rover T 3 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Rover T 3 engine control system detects a problem, the computer stores the diagnostic trouble
code B2403 in its memory.
To figure out what is wrong with your vehicle you must first extract the B2403 DTC For Rover T 3.
On 1999 and later B2403 Rover T 3 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B2403 Rover T 3 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. B2403 Rover T 3 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Rover car models :
|
The listed Rover models will give information about B2403 DTC.
|
