B257D DTC For Mercury Mountaineer Iii
Mercury Mountaineer Iii Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercury Mountaineer Iii engine control system detects a problem, the computer stores the diagnostic trouble
code B257D in its memory.
To figure out what is wrong with your vehicle you must first extract the B257D DTC For Mercury Mountaineer Iii.
On 1999 and later B257D Mercury Mountaineer Iii engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B257D Mercury Mountaineer Iii DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 5 |
Auxiliary Emission Controls |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| D |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine B257D Mercury Mountaineer Iii light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B257D DTC For Mercury Mountaineer Iii so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B257D!
You can also check other Mercury car models :
|
The listed Mercury models will give information about B257D DTC.
|
