B25A9 DTC For Nissan Z Concept
Nissan Z Concept Engine Specifications:
Engine Type : | Single Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Nissan Z Concept engine control system detects a problem, the computer stores the diagnostic trouble
code B25A9 in its memory.
To figure out what is wrong with your vehicle you must first extract the B25A9 DTC For Nissan Z Concept.
A good ground connection is also extremely important. B25A9 Nissan Z Concept engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B25A9 Nissan Z Concept DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
2 |
MFG - Manufacturer Specific |
5 |
Auxiliary Emission Controls |
A |
BBV Sensor Circuit Low Voltage |
9 |
A/C System High Pressure High Temperature |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B25A9 Nissan Z Concept code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Nissan car models :
The listed Nissan models will give information about B25A9 DTC.
|