B25BC DTC For Nissan 200
Nissan 200 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Nissan 200 engine control system detects a problem, the computer stores the diagnostic trouble
code B25BC in its memory.
To figure out what is wrong with your vehicle you must first extract the B25BC DTC For Nissan 200.
On 1999 and later B25BC Nissan 200 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B25BC Nissan 200 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 5 |
Auxiliary Emission Controls |
| B |
BBV Sensor Circuit Low Voltage |
| C |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B25BC Nissan 200 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Nissan car models :
|
The listed Nissan models will give information about B25BC DTC.
|
