B25C7 DTC For Nissan Tino

Nissan Tino Engine Specifications:
Engine Type :Multi-Cylinder Engine
Cylinder Type :W-Type Engine
Engine Air Intake Process :Turbocharged Engine

Your Nissan Tino engine control system detects a problem, the computer stores the diagnostic trouble code B25C7 in its memory. To figure out what is wrong with your vehicle you must first extract the B25C7 DTC For Nissan Tino.

A good ground connection is also extremely important. B25C7 Nissan Tino engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).

B25C7 Nissan Tino DTC Meaning

B Body Code - Problem is antilock brake system, electronic suspension and steering systems.
2 MFG - Manufacturer Specific
5 Auxiliary Emission Controls
C BBV Sensor Circuit Low Voltage
7 Cruise Control System - Vehicle Accel Too High

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B25C7 Nissan Tino code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

B25BC DTC (Previous DTC Code) ( Next DTC Code ) B25C8 DTC
You can also check other Nissan car models :
The listed Nissan models will give information about B25C7 DTC.