B267E DTC For Nissan Stanza
Nissan Stanza Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Nissan Stanza engine control system detects a problem, the computer stores the diagnostic trouble
code B267E in its memory.
To figure out what is wrong with your vehicle you must first extract the B267E DTC For Nissan Stanza.
On 1999 and later B267E Nissan Stanza engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B267E Nissan Stanza DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 6 |
Vehicle Speed Control And Idle Control System |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine B267E Nissan Stanza light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B267E DTC For Nissan Stanza so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B267E!
You can also check other Nissan car models :
|
The listed Nissan models will give information about B267E DTC.
|
