B2688 DTC For Nissan 100
Nissan 100 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Nissan 100 engine control system detects a problem, the computer stores the diagnostic trouble
code B2688 in its memory.
To figure out what is wrong with your vehicle you must first extract the B2688 DTC For Nissan 100.
B2688 Nissan 100 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B2688 Nissan 100 DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
2 |
MFG - Manufacturer Specific |
6 |
Vehicle Speed Control And Idle Control System |
8 |
Crankshaft Position Sensor Circuit Performance |
8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B2688 Nissan 100 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Nissan car models :
The listed Nissan models will give information about B2688 DTC.
|