B278A DTC For Toyota Yaris
Toyota Yaris Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Toyota Yaris engine control system detects a problem, the computer stores the diagnostic trouble
code B278A in its memory.
To figure out what is wrong with your vehicle you must first extract the B278A DTC For Toyota Yaris.
B278A Toyota Yaris engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B278A Toyota Yaris DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 7 |
Ignition System Or Misfire |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine B278A Toyota Yaris light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B278A DTC For Toyota Yaris so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B278A!
You can also check other Toyota car models :
|
The listed Toyota models will give information about B278A DTC.
|
